Erreur Recordnow

Moi lors de la finalisation, la gravure plante.
Un message d' erreur m' indique:
sans titre travail de données Arrêté avec des erreurs
Erreur -10 sur le secteur 1852162 - commande : BF Sens : 05 ASC : 2C ASCQ : 00
Je précise que la gravure marche sur un dvd+rw mais plante sur un dvd+r
DVD RW Emprex - Recordnowmax 4.5
Si qqu' un peut m' aider
Merci d' avance

 

Oui. Il peut y avoir plusieurs raisons a cela. Par ordre d'importance :

1) La version du firmware du graveur. Quel graveur as-tu et quel est sa version de firmware ?

2) La mise a jour de RecordNow Max. As-tu bien tourne le pxEngine408.exe pour le mettere a jour ?

3) Les media eux-meme. C'est beaucoup moins probable car il y a tres peu de DVD+R bas de gamme sur le marche, mais c'est tout de meme a verifier. De quel media s'agit-il (reference ADVDInfo, parce que Emprex est probabement la marque du packageur et non du media lui-meme) ?

Dan

 

DVD RW Emprex est la marque de mon graveur et j' ai installé la version de pxengine 408.

 

Quand j' essaye d' installer advdinfo il me donne un message d' erreur : Can' t load ASPI32 DLL
Make sure ASPI for Win 32 is installed

 

Ah ? De ton graveur ?!? Jamais entendu parle de cette marque Va donc visiter leur site et recherche une mise a jour de firmware, ou mieux, visite donc ce site :

- http://forum.rpc1.org/portal.php

Et recherche si Emprex n'est pas un OEM d'une grande marque pour trouver un "bon" firmware.

Pour ADVDInfo il te faut charger une couche ASPI que tu pourras trouver chez DOOM9 par exemple :

- http://www.doom9.org/index.html?/software.htm

Dan

 

j' ai tout essayé ou presque : sans résultat
la mise à jour du firmware, l' installation du pxengine 408 pour recordnow, la mise à jour de l' aspi (4.6).
Pour ce qui est de advinfo il m' indique un autre message d' erreur quand je lance la recherche.:(

 

Desole, je ne vois pas comment t'aider plus...

Si, eventuellement en retournant ton graveur a ton revendeur et en achetant un Pioneer

Dan

 

Ereur - 10

Slt,

voilà ce que m'a répondu le sav de recordnow pour une erreur - 10

Dear valued customer

Thank you for your inquiry.

Here are some general solutions for recording error.
I hope some of them would help to solve the problem.

1.Please try some other manufacturers' DVD-R discs.
There are several kinds of material and structure for DVD disc.
Some of them may not be suitable for your drive.
If your drive is SONY's DRU500A, please refer to the following web site.
SONY provides a list of recommended media for your drive.
http://sony.storagesupport.com/dvdrw/mediainfo_gb_na0305232.html

2.If you see the error when you use Wizard window,
please try the same work using main window.

3.Please stop other application during recording.
Then PC will be able to supply sufficient resources for recording
work. Sometimes even the screen saver influences recording work.
And the error can appear if energy saving measures or Powersaving
routines are activated. Please deactivate all such routines.

4.Please try to change the place of Temporary Folder
of RecordNowDX. (Tool - Option - Temporary)
As the default setting, the temporary folder had been setted
in the C drive(the drive which RecordNowDX is installed).
If you have another drive(partition) which has enough free space,
you can set the temporary folder to the drive.

5.Try "defrag" of hard disk before recording.
Any HDD, after running the applications for a while, becomes
fragmented. If this is the case, then the fix would be to run
the $B!H(Bdefrag.exe$B!I(B from your system. You can find this utility
at Program - accessory - system tool. This application may
take a while to run the complete defrag, but it is a good idea
to run this application once in a while. This helps our
RecordNowDX to find the source data faster, so that there
would be fewer problems.

6.If the source files are not on the local hard disk, please copy the
files onto local hard disk drive, then record the files from
hard disk to CD/DVD disc.

7.If the problem is on the way of disc backup job, please check the
type of source disc and target disc.
When you make backup of DVD disc, the type of the disc should
be the same. There are some kinds of DVD disc such as DVD-R,
DVD-RW, DVD+R and DVD+RW.
For example, when you try to make backup of DVD-R disc,
you should use blank DVD-R disc to record.

I hope the above information would be helpful.

If the problem continues, please send the following 2 files,
attaching to e-mail, so that we can see the detailed information.

1.PXJ file
We want to see what you are going to record, how you set the job.
After selecting the files to record, you can save the job as a file.
Please click "Save" and make a pxj file that includes the
job information.

2.Log file
We want to see the error message.
Please open the "Activity Log" window from "View - Show Log" menu.
Then save the log from "File - Save Log to File" menu.


Best regards,

ESJ Customer Support
EASY SYSTEMS JAPAN

 

Whaou ! Ca c'est du support !

Mais ca ne va pas forcement t'aider note-bien...

Dan