DEFIS ! ( DVD ntsc -> DV pal )

Salut,

j'ais xpress dv avec un modjo et un dsr11 pal .
Mon probleme est que j'ais un dvd ntsc ( kel ordre de trames ?) que je voudrais shooter sur une k7 dv en pal..
Vous avez une astuce ?

Merci !

Olicam

 

Ok d'apres mes recherchent il y a donc 3 solutions :

1- transcodeur materiel
2- transcodeur logiciel
3- after effect , j'ais trouvé ca :

It is done by simply pasting the NTSC movie into a 50Hz PAL Composition, and increasing the frame size by 120%. Frame blending is enabled, and this automatically generates some interpolation between fields to help smooth the motion. This is a result of the following posting on the EditDV-List server:

I have often said it should be possible, so I thought I ought to put my money where my mouth is!
Basically what you need to do is 2 things:
a) Change the frame size from 720x480 to 720x576
b) Take every 6 NTSC fields and make 5 PAL fields.

The first is obviously mundane, the second is where all the money can get swallowed! I did some tests last night, and found that the following AE procedure worked quite well:
1) Create a new 50Hz Comp with PAL DV Aspect Ratio at 720x576
2) Import your NTSC DV movie, set Interpret Footage to >Separate Fields>Lower Field First; and set >Aspect Ratio>D-1 NTSC
3) Drop the movie into the centre of the Comp.
4) Select it in the Time Layout, navigate down to the >Geometrics>Scale, click on the 100% and change it to 120%
5) Click on the Enable Frame Blending button and then turn it on for the layer.
6) Render out the movie using the SoftDV PAL presets.

This is not going to have Snell & Wilcox shaking in their boots but gives a fairly smooth motion effect it is as good as there was before motion interpolation came along.

Quand pensez vous ?

Olicam