"print to tape" multiple avec "video capture"

Telim · 25 Octobre 2004

Salut à tous,

Comment faites-vous pour faire un "print to tape" de plusieurs videos ? Je n'ai drois qu'à une seule alors que l'aide explique que l'on peut en ouvrir plusieurs

Print multiple clips to tape
You can use Video Capture to print multiple files to your camcorder, also called a batch print.

Connect your camcorder and turn it on in VTR mode.

Select the Print to Tape tab.

From the File menu, choose Open and choose the video clips that you want to send to the camcorder.

To select multiple adjacent clips, hold down the Shift key on your keyboard and click the first and last clip you want to select. The clips, including those between the selected clips, are highlighted.

To select multiple nonadjacent clips, hold down the Ctrl key on your keyboard and click each clip you want to select. The clips are highlighted.

Click Open. The last file you selected is displayed in the Preview window and should be displayed on the camcorder's viewfinder or on a television that is connected to the camcorder. All of the files you selected appear in the list to the right of the Preview window.

The number of clips you selected and the total length of all clips together is displayed in the Items to Print and Print length fields under the Preview window.

Click the Cue Device button . When in Cue Device mode, the Transport toolbar will control your camera or DV deck so you can locate the point on the tape where you want to start recording. Once you have located the appropriate place on your video tape, click the Cue Device button again to release Cue Device mode.

Click the Record to Device button . Video Capture displays a message asking if you are sure you want to proceed, since recording to the tape will overwrite any existing video on the tape.

Click Yes to continue. Video Capture will start recording to your DV device. Once the clips have been printed to the tape, Video Capture displays a message indicating that the print to tape has been completed.

Click OK.

Cliquez pour agrandir...

Telim · 25 Octobre 2004

honte sur moi !

je l'ai lancé directement par son icone dans le dossier d'install...

Là forcement, ça marche beaucoup mieux....

Merci Gilles !

Ateliers et Formations

"print to tape" multiple avec "video capture"

Telim

Telim

Les oiseaux du printemps

Dernières occasions

Dernières formations

Partager cette page

Nouvelles vidéos et photos

Les actus et promos

importation fichier impossible

Test Blackmagic Pyxis 6K

Review Canon R5 Mark II

Dernières Occasions

Dernières Formations

Statistiques du Repaire

Contactez-nous

Annoncer sur le Repaire

Soutenir le Repaire

Recherches utiles

"print to tape" multiple avec "video capture"

Dernières occasions

Dernières formations

Partager cette page

Dernières Occasions

Dernières Formations

Statistiques du Repaire