module inscription newsletter haut de page forum mobile

Rejeter la notice

formations etalonnage sur davinci resolve

Nos Formations Etalonnage avec Forest reviennent en octobre !
Adoptez une réelle méthodologie d'étalonnage professionnelle et atteignez vos objectifs créatifs avec nos formations intensives sur 3 jours
Toutes les infos
Rejeter la notice

Formation Lumière - Pratique Intensive du 14 au 16 octobre à Paris
Formez-vous avec cet atelier de pratique intensive dans des conditions exceptionnelles ! Formation finançable.
Toutes les infos

Ateliers et Formations

Caméra Canon avec capteur du D5 Mark II...

Discussion dans 'Cinéma numérique' créé par Goublin, 17 Mai 2009.

  1. Goublin

    So

    Points Repaire:
    5 405
    Recos reçues:
    29
    Messages:
    397
    Appréciations:
    +0 / 7 / -0
    J'ai entendu dire que Canon sortirait en fin d'année un camescope semi-épaule XL4 avec le capteur du célèbre D5 Mark II amélioré pour usage purement vidéo et avec enregistrement sur support carte mémoire.

    Quelqu'un a des infos ?


    Si c'est vrai, il est urgent de geler tout investissement vidéo en camescope pro.

    On va entrer dans la génération des caméras HD haut de gamme à tarifs attractifs et vraiment capables de produire des films hollywoodiens.:bravo::bravo::bravo:
     
  2. jcf

    jcf

    Points Repaire:
    4 180
    Recos reçues:
    27
    Messages:
    1 547
    Appréciations:
    +0 / 1 / -0
    d'ou vient le bruit ?
     
  3. Goublin

    So

    Points Repaire:
    5 405
    Recos reçues:
    29
    Messages:
    397
    Appréciations:
    +0 / 7 / -0
    Un bruit qui court chez les revendeurs vidéo en région parisienne ...;)
     
  4. trankilstef

    Points Repaire:
    2 330
    Recos reçues:
    20
    Messages:
    679
    Appréciations:
    +0 / 1 / -0
    Moi j'en avais entendu parler sur divers sites, mais plus pour courant 2010... Si c'est le cas, on peut s'asseoir sur le firmware spécifique à le vidéo pour le 5D... Par contre on estime dejà le tarif aux alentours des 10000$...

    "
    Rumor - Canon new video camera

    Postby redbluegreen on 30 Mar 2009 20:37
    From Canon rumors

    http://www.canonrumors.com/2009/03/new- ... ra-system/

    ''Don’t expect EOS vDSLRs to get any better at recording exotic frame rates or get manual control.''

    ''Canon is working on a pro video camera that has a 1x APS-C CMOS sensor able to capture up to 120hz or full frames a sec. Fab specs show 12.1MP. The body will be similar to that of the XL H1 with an EOS mount fully manual controls. Canon is working on 2 lenses for the system launch that have quick video AF motors and be compatible with Instant AF like their current video line. One will be a wide starting at 16mm and the other will be a tele zoom starting at 70mm.
    While I can’t directly comment on the dSLR video modes being restricted, I believe they are lowering the options for this system to be launched sometime in 2010. Other specs on the firmware of the camera are: 720p 60,30 1080p, 24, 30 and 60. EF and EF-S lens compatibility including Teleconverters. Will not work with Sigma as the mount communication protocol is somewhat changed, those lenses will have to be sent in for an updated firmware. Tamrons seem to be unaffected or at least not mentioned. The video format will be a flavor of MPEG 4 with a roof at 56Mbits/sec. Work is being done on a video RAW format that will be 12bit only, and will need a special IO module separate from the default package.
    While no pricing has been set, they target under 8k for the base system with the 16mm WIde and 4k or more for the IO module with uncompressed SDI Out and USB 3.''
    Storage system will be based on the CFast Spec! One Slot Only.

    ''More info available as things progress.''

    ''Don’t expect EOS vDSLRs to get any better at recording exotic frame rates or get manual control.''

    ''Specs may change but I’ll keep you updated.''"


    Canon Rumors Blog Archive New Video Camera?
     
Chargement...

Dernières occasions

 

Partager cette page

Dernières Occasions

 
Vous souhaitez annoncer sur le Repaire ? Contactez-nous